Cost Guide · Driveways · South Florida

How Much Does It Cost to Pressure Wash a Driveway? What Affects the Price

What really moves the price of a driveway wash, how companies measure the job, what is usually included and how to compare quotes without getting surprised.

  • By the Fresh N Kleen team
  • 5 min read
  • Sunrise, FL
Technician and homeowner looking at a stained concrete driveway
Quick answer

The cost to pressure wash a driveway depends mainly on its size, how dirty and stained it is, the surface (plain concrete, pavers or stamped), and how easy it is to reach. Most companies price by the square foot or a flat rate per job, and add a minimum service charge for very small jobs. Oil, rust and heavy algae cost more because they need extra products and time. The most accurate way to know is a free quote from a photo.

We do not publish flat driveway prices because two driveways of the same size can need very different work.
SizeSquare footage of the drive
ConditionAlgae, oil, rust
AccessWater, slope, gates

Ask five neighbors what they paid to have a driveway pressure washed and you will hear five answers. That is normal. A clean, plain two-car driveway is a quick job, while one that has ten years of oil, rust and green algae is a different project entirely.

Rather than quote a number that will not match your property, this guide shows what actually shapes the cost of driveway pressure washing in South Florida, how companies measure the work and what to ask so you can compare quotes fairly. For the wider picture, see our pressure washing cost guide, and for the how-to itself read how to pressure wash a concrete driveway.

What Determines the Cost of Pressure Washing a Driveway

1

Size

More square footage takes more time and solution. Larger drives often cost less per square foot.

2

Surface type

Plain concrete is quickest; pavers, stamped and coated surfaces need more care.

3

Stains and growth

Heavy algae, oil, rust and tire marks need pre-treatment and extra passes.

4

Access

Water availability, slope, tight gates and parked cars add or save time.

5

Add-ons

Sealing, joint sanding, rust removal and walkways are priced on top of the wash.

6

Minimum charge

Small jobs usually hit a minimum service charge that covers travel and setup.

Close look at a driveway with oil stains and algae being inspected

How Driveway Pressure Washing Is Priced

Common pricing methods
MethodHow it worksBest forWatch out for
Per square footArea is measured or estimated, then multiplied by a rateMost concrete drivewaysAsk whether walkways and aprons are included
Flat rate per jobOne agreed price after seeing photos or the propertyAverage two-car drivesConfirm what stain treatment is included
HourlyTime on site plus materialsOdd shapes, heavy stainingAsk for an estimate or cap
BundleDiscount when combined with other areasHomes with several surfacesConfirm what is bundled

Neither method is better in itself. What matters is that the quote is clear about what is being measured and what is included.

What Is Usually Included

Usually included

  • Pre-rinse and sweep of loose debris
  • Cleaning with a surface cleaner
  • Standard algae treatment
  • Rinse and edge cleanup
  • Basic protection of nearby plants

Often extra

  • Heavy oil or rust removal
  • Sealing and joint sanding
  • Walkways, aprons and steps
  • Pool deck or lanai
  • Very steep or hard-to-access areas

Why Two Driveways of the Same Size Cost Differently

If two quotes for the same driveway look far apart, check the following before you assume one company is overcharging.

  • What is measured. Some quotes use the driveway area, others include the apron, walkways and steps.
  • The method. A rotary surface cleaner and pre-treatment take longer than a fast pass with a wand.
  • Stain treatment. A quote may exclude oil and rust and add them later.
  • Minimum charge. A tiny job might be quoted at the company’s minimum.
  • Insurance and crew. Insured, trained crews cost more to run than a one-person operation.
Rotary surface cleaner leaving clean lines across a dirty driveway

How to Get an Accurate Quote

STEP 1

Send photos

Take photos of the driveway from a few angles, plus close-ups of stains.

STEP 2

Share measurements

Give an approximate size, or let the company measure remotely.

STEP 3

Ask what is included

Confirm treatment, sealing, walkways and plant protection.

STEP 4

Get it in writing

A written quote protects both sides and avoids surprises.

Tip: a good estimator will ask about the surface, stains, water access and any add-ons. If a company gives a firm number in ten seconds with no questions, it may not match the real job.

Ways to Keep the Cost Down

  • Bundle the driveway with the house, walkway or lanai in one visit.
  • Clear vehicles and move items before the crew arrives.
  • Make sure an outdoor spigot works and is reachable.
  • Wash on a regular schedule so growth never builds up.
  • Ask about maintenance plans if you rent or manage properties.

The full list of ideas is in how often you should pressure wash your house. And if you also want quotes for the roof, deck and fence, see what affects the cost of roof, deck and fence washing.

DIY vs. Professional: What Really Changes

A rented machine looks cheap, but you also need a surface cleaner, the right chemicals, hours of your time and the skill to avoid stripes. On a heavily stained driveway, the professional route often saves money once you count all of it. Small, lightly dirty drives are a fair DIY. See our driveway how-to for what to expect.

Final Thoughts

The right price for a driveway is a fair price for the right method on the surface you actually have. If you send us a few photos, we will look at the size, surface and staining, and tell you exactly what it needs and what it involves. No obligation and no pressure.

Frequently Asked Questions

How much does it cost to pressure wash a driveway?
It depends on the size, the surface, how dirty or stained it is and how easy it is to access. Most companies price per square foot or with a flat rate after seeing photos, so a quote is the reliable answer.
Do companies charge per square foot for driveways?
Many do, but some quote a flat rate per job. The key is knowing what square footage is measured and what is included.
Is there a minimum charge?
Most professionals have a minimum service charge that covers travel, setup and breakdown, so very small jobs may be quoted at the minimum.
Does oil or rust cost extra?
Often yes. Heavy oil, rust and old stains need pre-treatment and more time, so they are usually quoted separately or built into the price.
Is sealing included in the wash?
Usually not. Sealing and joint sanding are separate services because they need extra materials and a dry surface.
How can I get a quote from a photo?
Send clear photos of the whole driveway and any stains, plus the address. Many companies can give a firm quote from photos, or after a quick measurement.
Are cheaper quotes worth it?
Sometimes, but check what is included, whether the company is insured and what method they use. A very low price may skip pre-treatment or use too much pressure.

Related guides

Fresh N Kleen Pressure Washing Services logo

About Fresh N Kleen Pressure Washing Services

We restore driveways, roofs, patios, pool decks and commercial properties across South Florida from our base in Sunrise, FL. Free, no-obligation quotes: call (954) 405-6642 or request a quote online.

Get Your Free Quote

Send us your address and a few photos. We will come back with a clear, no-obligation price.

Request a Free QuoteCall (954) 405-6642WhatsApp UsServing Sunrise, Plantation, Pompano Beach, Fort Lauderdale, Deerfield Beach and nearby cities.

Want a clear driveway quote?

Send us your address and a photo of your driveway. We will give you a clear price in writing, free and with no obligation.

WhatsApp